DD Bioinfotech

Fume hoods are equipment’s that are used to ensure safety for the user as they won’t be exposed to many hazardous and dangerous fumes. Fume hood capture the fumes/effluents released during any given experiment, contain them in the enclosure and then emit through their well -designed exhaust system. We specialize in standard and customized fume hood. Fume hoods typically protect only the user, and are most commonly used in laboratories where hazardous or noxious chemicals are released during testing, research, development or teaching. They are also used in industrial applications or other activities where hazardous or anxious vapors, gases or dusts are generated or released.

• Chemical Laboratories
• Testing and Research

• Fully Polycarbonate Construction PP Sheet with thickness of 19mm. (0.75 inch) approx.
• Low noise levels energy efficient mechanism.
• CE marked and NABL certified.
• Floor standing.
• Semi close ventilated exposures.
• Provided with sliding sash made out of special grade shatter proof glass duly framed in wooden/aluminum frame with sliding motion and counter weight balanced mechanism.
• Illumination level of approx. 800 lux on the work table.
• Heavy duty exhaust system, comprising of dynamically balanced centrifugal impeller with high speed motor.
• Suitable ducting of required dimension as per the individual requirements (Optional)
• Microprocessor based controls (Optional) Advanced microprocessor control supervises operation of all hood functions.
• VOC sensor to monitor chemical concentration within the cabinet work zone. (Optional).
• Electrical Outlets: Direct mounted single electrical outlet. (Available in all international socket outlet types. Specify when ordering.)
• Aesthetically Designed-Designed according to the standards and principles underlining industry’s aesthetic values.
• Corrosion Resistant Interior and Exteriors - Corrosion resistant coatings like epoxy coatings are applied inside and outside the fume hoods to prevent against degradation due to moisture, salt spray, oxidation or exposure to a variety of environmental or industrial chemicals/ corrosive agents.
• Energy Efficient – fume hoods uses less energy to provide the same level of performance, comfort and convenience, thus making it energy conserving.
• Sturdy Construction – fume hoods are built with robustness to withstand stress and strain, giving it long life and ability to perform in extreme stress environments.

• Dynamic airflow provides an air barrier to prevent contaminants from entering into critical controlled environments during material transfers

• Vertical purging to trace any contaminants that have potentially entered post material transfer.

• Unit operates with a recirculating airflow and on-board fans hence, external ducting is not required.

• Low Noise Levels enhances user focus
• 10??? Sloped front for exceptional comfort and ergonomics
• Spacious work area with comfortable arm rests
• Increased Light Intensity for a brighter work environment

• Smart Clean front window design allows the user to reach the interior surface with ease by sliding the sash below the work table height.
• Intuitive Control Panel displays safety and real time performance data like Inflow and Down flow air velocities, Hours of Operation, Filter status, Safe Window position, deviation in airflow velocities, Reduced energy operation activation, UV light indicator and activation, activating the power receptacles, Fluorescent light activation.
• Smart Port This NSF certified port facilitates routing of tubing and cables through negatively pressurised side wall without compromising containment.
• Programmable UV light extends the bulb life and Saves Energy.

ultrasonic cleaner is a device that uses high-frequency sound waves (ultrasound) to clean delicate or intricate items by removing dirt, grease, oil, and other contaminants. It is widely used in industries such as jewelry, healthcare, electronics, and automotive.

• Ultrasonic Frequency: Typically ranges between 20 kHz and 40 kHz.

• Cleaning Solution: Usually water-based, sometimes with added detergents or solvents for enhanced cleaning.

• Transducers: These generate ultrasonic waves in the liquid.

• Cavitation Process: Sound waves produce microscopic bubbles that implode, creating a scrubbing action on the item’s surface.

• Reaches into tiny crevices and hard-to-access areas.

• Non-damaging to delicate surfaces.

• Highly effective at removing stubborn dirt or residues.

With prosperous industry practice, our entity has gained huge appreciation in the market by presenting Air Shower  to our respected patrons.

Biosafety cabinets, also known as biological safety cabinets, are enclosed, ventilated laboratory workspace areas designed to protect the user and surrounding environment from pathogens. All exhaust air is HEPA filtered to remove hazardous agents such as viruses and bacteria.

• Humidity & Temperature Controlled by Microprocessor based PID Controller.
• Inner Chamber Stainless Steel 304 grade
• Outer Body Stainless Steel 304 grade
• Full length inner glass door or door window for visual inspection during temperature process to prevent the temp disturbance.
• Air fans for forced air circulation fitted at rear wall of the chamber to maintain temperature uniformity in the chamber.
• Lock & Key arrangement, Lockable Caster wheel mounted cabinet.
• The inner chamber is properly insulated with Special Grade Glass wool to prevent thermal losses.
• Door operated LED light system inside the chamber.
• Main Panel consists of Switches for Mains and Heater, Temperature and Humidity Controller.
• Water Reservoir for Humidity:-Each chamber has stainless steel water reservoir at the bottom and water is heated by low wattage immersion heater which assures to maintain humidity from atmospheric humidity up to 95% with a sensitivity

We offer the top range of Vertical Laminar Airflow Cabinet for our valued patrons.

Amongst the chief organizations of this domain, we are occupied in providing Bio Safety Cabinet  to our clients, which is highly demanded in the market.